Tahukah Anda apa masalah gaya pegas yang tidak mencukupi?

Itu mesin pegas is the main mechanical equipment for producing springs, but the spring machine manufacturer tells you that sometimes the springs produced will have insufficient elasticity. why is it like this? How should we deal with it? Itu following is Zhejiang Omnipotent Spring Machine Co.,ltd. Let's talk about it:

1. Parameter desain pegas yang tidak beraturan tidak masuk akal: hanya fokus pada parameter seperti diameter luar, diameter dalam, dan panjang, dan sering mengabaikan luas penampang dan tinggi nada, sehingga elastisitasnya tidak mencukupi;
2. Itu choice of spring is unreasonable: the light-load type is selected for the car in the picture, which cannot carry heavy loads, resulting in insufficient elasticity.
3. Itu quality level of the safety error spring: the ordinary spring is a high-quality spring, and the feel is sufficiently elastic.
4. Itu temperature of the produced spring exceeds the specified limit, causing the spring to decrease or even lose its elasticity.
5. Itu spring wire itself is soft, or the spring quenching temperature can be kept low or the working time management is not long enough, or the post-tempering temperature is too high, and the spring forming time is long, which will affect the pressure and tension of the enterprise. Itu elastic strength is not enough.